The DGM series magnet drive gear pump-motor units derive from the DGD series. Built to handle clean and relatively viscous fluids at a max temperature of 95 °C (203 °F) with pressure up to 4 bar (58 psi). The pump housing is available in stainless steel or Vectra and the gears are in Vectra. Static seals are available in NBR, EPDM or VITON . The dynamic seal less design is guarantee of reliability. Suction/discharge ports are 8 mm barbed end. The pump drives are available in 12V or 24V brush DC options and in a range of different nominal speeds and powers for intermittent duty use. NSF certified pumps for potable water or fluids for human consumption are also available.
Environmental Protection, Food Processing, Pharmaceutical, Inkjet Printing, Laboratory Application, Water Treatment, Chemical Transfer, Chemical Recirculation, Vending Equipment